Additional details:
The wiring in the car right now does not look safe. One problem is my car has duel electric radiator fans. When I set up your system do I need relays for the fans and with my battery up front and the engine in the back how do I run the powercable to the power unit.
Posted by rwelter1 on 04/24/10 at 10:45 pm
jharris - Each of the outputs on the POWERCELLs are rated up to 25-amps. If both fans together draw less than 25-amps, you can power them off of the same output off of the front POWERCELL. If the individual current draw of one fan is less than 25-amps, you can power each fan off of its own output off of the front POWERCELL.
Alternately, you can use a POWERCELL output to trigger the coil of a relay to switch the fan current if necessary.
We include two 8 AWG power feeds to go to each POWERCELL. You just run the power from the battery to each POWERCELL using the included cables. Also included in the kit are the primary fuses necessary to protect those feeds to the POWERCELL. You will also have to run a heavy gauge cable from the battery to the starter to crank the motor.
Jay
Posted on 04/25/10 at 07:53 pm